Product line  

Technical demands for venue stage setup are more and more rigorous, both from artist’s side as well as production side. Monitor wedges must be low profile in order not to interfere with audience’s sight line. Performers expect highest possible sonic authenticity. M 1225 HH is designed to meet both crucial demands. In addition it is extra light weight and offers huge peak output capabilities.

# small size floor wedge especially for vocal and acoustic instrument monitoring
# 30 degrees angle , small footprint and height
# exceptionally flat frequency and phase response and polar characteristic due to    "point source" concept achieved using coaxial driver
# extreme power to size ratio due to HIGHheadroom concept
   powered by ICEpower
# conventional cooling - no fans
# for vocal and instrument monitoring when size is of great importance
# great drum monitor when combined with ATA series subwoofers

OPERATING FREQUENCY RANGE
42 Hz … 17.000 Hz

FREQUENCY RESPONSE
52 Hz … 16.000 Hz (half space)

MAXIMUM PEAK SPL
129 dB with music at 1m

COVERAGE
60 deg. Conical

LOW-MID FREQUENCY DRIVER
one 12" neodymium driver
impedance 8 ohms
voice coil 2.5"
power handling 400 W

HIGH FREQUENCY DRIVER
one 1.4" exit neodymium driver
coaxially on LF driver
impedance 8 ohms
voice coil 2.5"
power handling 100 W

ACOUSTICAL CROSSOVER
1100 Hz

AMPLIFIER
switch mode PSU , class D
amplifier 630 W total

POWER LF
330 W burst RMS at 8 ohms
(51 V burst rms)

POWER HF
300 W burst RMS at 8 ohms
(49 V burst rms)
input level + 4 dBu

FINISH
box : birch plywood 15mm
waterborne structure paint
(optional custom color)

grille : 1.5 mm stamped steel powder coated
with special protective acoustic
foam on the inside

MECHANICAL
weight 19 Kg
dimensions 530 W x 388 H x 448 D
(footprint) angle : 30 deg.

OPTIONAL
protective cover

OTHER
CE compliant
weather resistant
3 years warranty